中国广东省东莞市凤岗镇玉湖路9号B栋8F
anja@flsrfidpro.com+852 46090773
在 24 小时内回复
LED 指示灯 RFID 标签
LED 指示灯 RFID 标签
LED 指示灯 RFID 标签
LED 指示灯 RFID 标签
+

LED Indicator RFID Tag

A passive UHF LED label that lights up on command, so a picker can see the right carton from the aisle instead of reading every label. PET, 95 x 30 x 0.2 mm, EPC Class 1 Gen 2 at 905-928 MHz on Alien-H9 or Monza-m4qt, IP68.

CategoryLED RFID Tag
Views1,687
Total Sold319,108
SpecificationStandard white PET label, Alien-H9, no printing / Custom printed and encoded label, Monza-m4qt
Price联系询价
Download Specification
ItemSpecification备注
ProductLED indicator UHF labelPassive, reader-triggered light
尺寸95 × 30 × 0.2 毫米Label body, excluding release liner
材质PET filmWhite printable face
Weight2.0 克—
协议EPC Class 1 Gen 2; ISO/IEC 18000-6C适用于标准超高频(UHF)读卡器
Frequency905-928 MHz (CN and US)确认其他地区的频段
ChipAlien-H9 / Monza-m4qtChip selected at order
内存96 or 128-bit EPC; 512-bit user芯片相关
Read range, handheld≥ 1 m2 W ERP, 1 W transmit, 0-3 dBi antenna
读取范围,固定≥ 3 m4 W ERP, 6-12 dBi antenna
应用表面Non-metalCarton, plastic, paper; not direct on steel
安装永久性背胶Press flat, avoid bridging shelf edges
ProtectionIP68潮湿区域和冲洗区
工作温度-40 至 +85 °C—
存储温度-40 至 +105 °C—
指示器LED, reader-triggered样本固定为浅色

Choosing the version for the job

应用场景配置Why
Carton and tote picking标准 PET 标签,Alien-H9Lowest cost per lit pick position
Serialised assets and long dataMonza-m4qt, 128-bit EPC更多 EPC 房间用于长编号
File folders and archive boxesStandard label, permanent adhesiveThin enough not to catch in a drawer
Steel shelves, metal bins防金属 LED 查找标签The film label detunes on metal
Dense batch picking已修复阅读器,并解决 EPC 问题One light at a time in a crowded bay

Factory inspection sheet

CheckPass criteria失败时操作
在频带边缘读取Reads at 905 MHz and 928 MHzRe-encode, then scrap
LED 触发Lights on the select command when addressed移除标签
AdhesiveNo lifting after 24 h on kraft boardRe-press or scrap
Print and colourMatches the approved proofIsolate batch and re-print
尺寸95 × 30 mm within ±0.5 mmAdjust the die, scrap out of tolerance
Sealing (sampled)浸入后无进水暂存批次并重新测试

Application scenarios

Warehouse picking and order assembly

Cartons sit in a bay behind a printed location label, and the picker's handheld carries a list of EPCs. The reader lights the first carton, the picker takes it, the next one lights. Walking replaces scanning, and a new picker reaches the same speed as an experienced one in days rather than weeks.

Picker walking a warehouse aisle between carton-filled racks

Archives and file location

In an archive the drawer is the shelf: folders are thin, packed tight and labelled on the tab. A label on the folder lights when it is requested, so a clerk opens the right drawer and takes the right file without reading a tab that is half-hidden by the folder in front of it.

Hand pulling a folder from an open filing cabinet drawer in an archive

Tool room and spare-parts cabinets

深抽屉内的小零件常因标签无法从过道看清而难以识别。由于光线可从抽屉边缘透出,仓管员无需拉出三个抽屉即可快速取用紧固件或备件,同时保持抽屉原位存放。

Labeled cartons and boxes glowing with LED tags on a storage shelf

A label that lights up when you are looking for it

仓库拣货错误大多并非判断失误,而是找错。拣货员沿通道行走,逐一扫描纸箱标签;在视线高度,错误的箱子与正确的箱子外观完全一致。LED 指示灯 RFID 标签正是为此场景设计:当读写器读取 EPC 时,标签即刻亮起,正确位置从数米外即可清晰识别,无需逐个拆箱核对。

It is a passive UHF label — PET film, 95 × 30 × 0.2 mm, EPC Class 1 Gen 2 — so there is no battery to replace and no maintenance round. It is built for non-metal surfaces such as cartons, totes, folders and plastic bins, and carries an IP68 rating for damp stores and wash-down areas.

Roll of white LED indicator RFID labels with adhesive backing

Five details that decide whether the light helps

1. Light colour

The light has to win against your ceiling lighting, not match it. One high-contrast colour is enough for picking; a second colour only earns its cost when the colour itself carries a status, such as a priority wave or an exception. We agree the colour on a sample against your own floor rather than on a white desk.

2. 为何轻盈

灯光并非常亮。当读取器向该 EPC 发送选择指令时,标签才会亮起。因此,一个货位可容纳数百个此类标签,但只有您指定的那个会发光。手持式读取器可在货架处触发;固定式读取器则可在通道口作为拣选提示灯触发。

3. No battery, no service interval

The label takes its operating power from the reader field. Nothing needs charging, nothing is swapped out after a couple of years, and nothing has to be disposed of separately when the carton is recycled. The trade-off is that the light only shows while a reader is powering the tag — which is exactly when somebody is looking for it.

4。卡住的位置决定了读取效果

将标签平整粘贴于纸箱表面或周转箱前缘,高度与拣货员视线齐平,并确保光线不被胶带或悬垂的箱盖遮挡。由于该设计适用于非金属表面,请勿将标签跨越钢制货架边缘或金属隔板;此类位置请使用抗金属 LED 标签。

LED indicator labels applied along a row of labelled patch cables

5. Bulk reading without a light show

固定阅读器可同时处理其作用范围内的数百个标签。通过寻址单个 EPC 即可保持通道安静:操作员看到单盏指示灯亮起后前往该位置,下一条指令将点亮下一个物品。这正是标签适用于批量拣选的要点——当同一货架上有二十个订单待处理时尤为有效。

Where the light pays for itself

The same label is used in three very different rooms, and in each of them the value is the same: it turns a search into a walk.

  • Warehouse picking.纸箱和周转箱贴有标签,手持扫描枪显示订单行信息,拣货员停止扫描该库位中的每个箱子。
  • Archives and files.文件夹和归档盒又薄又挤,抽屉装满时,光驱比打印代码更快。
  • 工具柜和备件柜。 Small bins on deep shelves are where reading labels fails; a light visible over the shelf edge does not.

标有发光 LED RFID 标签的纸箱和文件盒陈列在货架上

在实时仓库中,标签通常先作为拣货辅助工具引入,随后才扩展至循环盘点功能。因为一旦所有位置可按需点亮,盘点便从“搜寻编码”变为“手持清单沿通道核对”。

Picker walking a warehouse aisle between carton-filled racks

Printing, encoding and adhesive

打印

The face takes variable data: serials, location codes, barcodes and human-readable numbers, printed in the same pass as the fixed layout. Print is specified against a proof, because a barcode that scans on the desk and fails under a shelf lamp is a wasted batch.

Encoding

EPC values are written and verified before packing; the 96 or 128-bit EPC area and the 512-bit user memory are both available for your data. Send the data file with the order and the labels arrive locked to your numbering scheme, not to ours.

粘合剂

Standard permanent adhesive is specified for kraft carton, coated board and most plastics. Tell us the surface and the temperature it will see — chilled store, damp wash-down, dusty yard — and we match the adhesive rather than shipping the default.

订单备注

Minimum order quantity and lead time are quoted per order because both follow the chip and the print: stock material with a standard chip and no print moves fastest, while custom print needs a proof round and custom encoding needs a data check. Samples with your own EPC values are the normal way to start, and the colour of the light is fixed at that sample stage.